How to quickly grow nails

How to quickly grow nails
Beautiful by nature nails – the destiny of the few. Fortunately, this problem can be solved: nails become ideal. The procedure of building up allows you to quickly increase their length and change the shape by applying artificial materials to the surface of the nail plates.

You will need
  • – nail polish remover;
  • – Manicure set;
  • – формы;
  • – гель;
  • – tips;
  • – a napkin;
  • – glue;
  • – type cutter;
  • – acrylic;
  • – UV lamp.
Instructions
1
Rapidly build nails можно с помощью геля, акрила или смеси, состоящей из этих компонентов. Реже используется тканевое наращивание.

2
Upbuilding is preceded by preparatory work. First, erase the old varnish. Then, if necessary, trim the natural nails, necessarily leaving one or two millimeters to subsequently fix on the nail plate form.

3
Придайте натуральным ногтевым пластинам форму, приближенную к форме вспомогательного трафарета. Затем удалите кутикулы, после чего с помощью специальной пилочки зачистите блестящий слой природного ноготка. Следом за этим обезжирьте ногтевые пластины.

4
Attach special auxiliary forms to the free edge of the nails, and then apply the first layer of the gel. To quickly dry the gel, place the nail plates covered with this substance in the area of ??action of the ultraviolet lamp. As soon as the first layer dries, re-coat the nail plates with gel and leave them to dry under the ultraviolet rays of a special lamp.
5
Remove the auxiliary forms, and then perform modeling of the shape of the nail plates. Then apply the last layer of gel and dry with a special ultraviolet lamp.

6
Если наращивание выполняется посредством типс, выполните дезинфекцию рук, после чего маникюрными ножницами обрежьте свободные края природных ногтей и скорректируйте их форму при помощи пилочки. Нанесите на кутикулы средство для удаления кутикул and gently push them away with an orange stick.

7
Treat the nail plates by removing the shiny surface. After that, degrease the nails and select suitable nails for the size of the tips (width of the tip should correspond to the width of the nail plate in the central part of the nail).

8
Apply glue to the inside of the tip. Then attach the tips to the nail plates and, slowly lowering them, press firmly. Soak for ten seconds and remove the excess glue with a lint-free napkin.

9
Using the tip cutter, shorten the tips and give them the desired shape. After that, cut the docking line between the tips and the nail plate (cut the tips, and not the natural nail).

10
Apply the modeling gel, moving it from the middle towards the cuticle. The gel should lie evenly on the sides of the marigold. Dry nails in an ultraviolet lamp, and then apply a subsequent layer of gel and again dry.

11
To build Nail Acrylic Two technologies are used: on forms and on tips. But this material has negative sides: a small toxicity and a rather unpleasant smell. The sequence of nail extensions with acrylic is similar to the procedure for correcting the shape and length of the nails with the use of a gel.

Leave a Reply

Your email address will not be published. Required fields are marked *